Craigs Silver Leaf 30ml
One-component paint Craig's Silver Leaf by Goldfarben brings a silver leaf effect to tombstones. It is extremely resistant to UV radiation and oxidation.
| Category: | Colors for stone |
|---|---|
| Weight: | 0.1 kg |
| Profession: | stone mason, sculptor |
Craig's Silver Leaf (30 ml) – Groundbreaking Silver Paint for Stone Masons by Goldfarben
Are you looking for an alternative to complex silver leaf gilding that offers the same luxurious gloss but at a fraction of the effort and cost? Craig's Silver Leaf from the renowned British manufacturer Goldfarben represents an absolute technological breakthrough in decorating headstones, memorial plaques, and monuments.
This special single-component paint was developed based on detailed information from the manufacturer's official documentation, specifically for demanding stone masonry applications. It offers a long-lasting brilliant shine and color fastness that until now only traditional silver leaf could provide, but with an incomparably simpler and faster application directly on-site. Thanks to advanced pigmentation technology, the paint is immune to tarnishing (oxidation), UV radiation, and the harshest weather conditions. As a result, the lettering stays looking like new year after year.
Why professional stone masons choose Craig's Silver Leaf:
- More durable than silver leaf: It creates a robust surface that easily resists abrasion, mechanical cleaning, and accidental careless handling.
- No monument dismantling required: No more transporting heavy stones back to the workshop. You can apply the paint directly at the cemetery in almost any weather.
- Perfect application and coverage: Exceptional covering power and flow ensuring that the paint instantly penetrates even the deepest pores of the engraved lettering and its side walls.
- Guaranteed result: The shade and high radiant gloss you see in the liquid state inside the tin remains exactly the same after drying completely.
- Zero waste: The stable formulation guarantees that the paint does not form a skin on the surface, does not thicken in the packaging, and can be completely used up.
Instructions for Use
To achieve the maximum declared lifespan and a mirror-like gloss, strictly follow the professional procedure recommended by the manufacturer:
1. Substrate preparation – do not underestimate the foundation of success
- The stone surface and the lettering itself must be 100% clean, dry, and free of dust or grease before painting.
- Removal of old layers: Completely remove all remnants of previous paints and varnishes from the inscription. We recommend using a suitable paint stripper and a plastic brush (never use steel brushes, which could damage the polished surfaces of the stone).
- Thorough rinsing: After chemical cleaning, rinse the lettering with plenty of clean water so that no chemical residues remain in the pores.
- Important notice: After rinsing, you must allow the stone to dry thoroughly. The stone must not show any internal moisture, otherwise the paint will lose adhesion.
- You can read the entire comprehensive procedure in our article: Restoration of old text on a monument: Procedure, equipment, and everything you need to restore lettering
2. Actual paint application
- Forget about primers: Craig's Silver Leaf is applied directly onto clean stone. There is no need to use any primer or undercoat varnish.
- Before opening and during work, stir the paint thoroughly so that the heavy metal pigments are evenly dispersed.
- We recommend applying 2 optimal coats.
- The paint comes ready for direct application with a fine brush or for spraying.
3. Thinning and cleaning of tools
- Use exclusively mineral spirits (white spirit) to clean brushes and spray guns.
- If you need to adjust the paint for spraying, alter the viscosity by carefully adding mineral spirits – up to a maximum of 10% of the volume. Always add drop by drop according to the rule: "less is more".
Estimated Drying Table
The drying speed depends on the ambient temperature, airflow, and humidity. A warm, sunny day with a gentle breeze is ideal. The times below serve as an approximate guide for planning field work:
| Ambient Temperature | Touch Dry | Through Dry (Fully Cured) |
|---|---|---|
| 30 °C | 15 minutes | 24 hours |
| 20 °C | 30 minutes | 24 hours |
| 10 °C | 1.5 hours | 36 hours |
| 5 °C | 3 hours | 48 hours |
Frequently Asked Questions (FAQ)
Is it necessary to coat the lettering with a clear topcoat varnish?
No. Craig's Silver Leaf is designed as a highly durable final system. The UV-stable pigments and special solvent-based binder do not need additional protection, and the paint will not lose its gloss even without clear coating.
Can I mix this paint with other shades?
Yes. The paint is fully compatible with other shades of professional stone masonry paints from the CraigsTone range by the same manufacturer. You can mix them together to achieve the exact shade according to your customer's request.
Can I use the paint on materials other than stone?
Yes, the paint has extraordinary adhesion and is highly versatile – you will achieve fantastic results with it on other exterior and interior substrates as well.
Product Technical Parameters:
| Manufacturer: | Goldfarben Ltd (United Kingdom) |
| Volume: | 30 ml |
| Formulation Type: | 1-component ready-to-use (solvent-based) |
| Paint Shade: | Silver Leaf Shade (intense, bright shade of pure silver) |
Discussion
Be the first who will post an article to this item!